Location:Home > News
What are the differences between the E-series melt pump and the standard melt pump?

What are the differences between the E-series melt pump and the standard melt pump?

The company's E-series melt pump is mainly used in conjunction with an extruder to pressurize medium and high viscosity polymer melts, and after pressurization,

hot melt adhesive dosing melt pump

hot melt adhesive dosing melt pump

Introduction to hot melt adhesive metering pump:The hot melt adhesive pump is mainly used for the transportation, pressurization, and metering of high-temperatu

How to choose a melt pump model for an extruder?

How to choose a melt pump model for an extruder?

The melt pump technical engineer needs to be clear about the following working conditions when selecting suitable melt pump specifications for the extruder:The

Structure diagram of melt pump and list of accessories

Structure diagram of melt pump and list of accessories

The structure of extrusion melt pump mainly consists of pump body, active and driven gears, sliding bearings, front and rear end plates, packing seals and other

Melt Pump in Microporous Plastic Extrusion Molding

Melt Pump in Microporous Plastic Extrusion Molding

Microcellular plastics refer to foams with a cell diameter of 0.1~10 pum and a cell density of 109~1012pieces/cm3, which have excellent comprehensive properties

ZB-D Polymer Pipeline Booster Metering Gear Pump

ZB-D Polymer Pipeline Booster Metering Gear Pump

High pressure pipeline booster pump, especially suitable for the reaction transportation and pressurization of high-temperature and high viscosity polymer melts

2023 International Rubber and Plastic Exhibition: BATTE Booth 8P55

2023 International Rubber and Plastic Exhibition: BATTE Booth 8P55

The "CHINAPLAS International Rubber and Plastic Exhibition" has grown with the growth of China's plastic and rubber industry for over 30 years, and has now deve

Structure and working principle of hot melt adhesive metering gear pump

Structure and working principle of hot melt adhesive metering gear pump

Structure of hot melt adhesive metering gear pumpThe structure of the hot melt adhesive metering gear pump consists of pump casing, driving and driven gears, sl

Continuous screen changer for granulation

Continuous screen changer for granulation

Plastic granulation can be divided into modified granulation and recycled granulation. For modified granulation, we can provide a variety of screen changer type

What are the inspection standards for shaft seals of melt gear pumps

What are the inspection standards for shaft seals of melt gear pumps

The shaft seal of the melt gear pump usually adopts packing seal, mechanical seal, or a combination of the two sealing methods; There are four inspection standa

CONTACT US

  • Tel: +86 371 67991755
  • E-mail: sales@battemachinery.com
  • whatsapp: +86 158 38331071
  • After-sales Tel: +86 371 67997677 / 67997877
  • Mob: +86 15838331071
  • Address: No.11 Changchun Road, High & New Technology Development Zone, Zhengzhou, China.