The resin kettle bottom pressure-boosting gear pump is primarily suitable for resin materials with high viscosity that require pressurized transportation. Specifically, the following are some common resin materials that are suitable:
Polylactic Acid (PLA) Resin:
Characteristics: PLA resin is a polyester polymer obtained through polymerization using lactic acid as the main raw material. It is a new type of biodegradable material.
Applications: Due to its environmental friendliness and biodegradability, it is widely used in packaging materials, fibers, films, and other fields.
Other High-Viscosity Polyester Resins:
Characteristics: These resins typically have high viscosity and require a pressure-boosting pump to ensure stable transportation in pipelines.
Applications: They are widely used in coatings, adhesives, synthetic fibers, and other fields.
Epoxy Resin:
Characteristics: Epoxy resin is a thermosetting resin with excellent physical and chemical properties such as high strength, high wear resistance, and corrosion resistance.
Applications: It is widely used in electronics, composites, coatings, and other fields.
Polyurethane Resin:
Characteristics: Polyurethane resin has good elasticity, wear resistance, and chemical resistance.
Applications: It is mainly used for manufacturing foam plastics, elastomers, coatings, adhesives, and other products.
Phenolic Resin:
Characteristics: Phenolic resin is a thermosetting resin with high thermal stability, flame resistance, and chemical resistance.
Applications: It is widely used in manufacturing friction materials, insulating materials, coatings, and other products.
In addition to the above-mentioned resin materials, the resin kettle bottom pressure-boosting gear pump may also be suitable for other resin materials with high viscosity that require pressurized transportation. However, it should be noted that different resin materials have different physical and chemical properties. Therefore, when selecting a resin kettle bottom pressure-boosting gear pump, it is necessary to choose based on the specific characteristics of the resin material and the transportation requirements.
Furthermore, the structure and materials of the resin kettle bottom pressure-boosting gear pump also need to be designed and selected according to the characteristics of the resin material being transported to ensure stable operation and long service life of the pump. For example, for high-viscosity resin materials, gear and bearing materials with good wear resistance should be selected; for resin materials with corrosive properties, pump housings and sealing materials that are corrosion-resistant should be chosen.
Email: info@battemachinery.com
WhatsApp: +86 158 38331071
