The melt pump technical engineer needs to be clear about the following working conditions when selecting suitable melt pump specifications for the extruder:
The specifications of the melt pump for extruder selection need to be provided: the output of the extruder, single/double screw, material type, whether there is corrosiveness (and special characteristics), working temperature, viscosity, and inlet and outlet pressure values. The output of the melt pump is related to material viscosity, temperature, working pressure, and rotational speed. For special customization requirements, please contact the melt pump manufacturer.
It is recommended to use a universal coupling to connect the reducer and melt pump to eliminate the influence of thermal deformation; The melt pump belongs to a positive displacement forced delivery pump, and the pump output flow can be adjusted by adjusting the pump speed. It is recommended to use variable frequency speed regulation to achieve nearly linear flow output of the melt pump.
Zhengzhou Batte melt pump manufacturer is familiar with the extrusion processes of various plastic and rubber materials, and has extensive experience in the application of melt pumps in extrusion systems. It can provide melt pump equipment for various sheet materials, plates, pipes, films, wire drawing, underwater cutting, master batch extrusion granulation, rubber preforming, and other extrusion systems.
Email: info@battemachinery.com
Whatsapp: +86 158 38331071
