Electrical heating polyester melt gear pump Operating Parameters:
Outlet/Inlet: 1 outlet/ 1 inlet
Flow per Outlet cc/rev: 100 cc/r
Operating Temperature: <200ºC
Max. Outlet Pressure: <8MPa
Min. Inlet Pressure: <0.2MPa
Rotate Speed: 10~300 r/min
Shaft Sealing: Combined Sealing
Electrical heating polyester melt gear pump Application
1. Polymer extrusion molding, such as granulation, film, pipe, plate, sheet, etc.
2. Transporting high-viscosity materials such as PC, PMMA, ABS, HIPS, PET, PVB, PS, PP, PA, PE, PVA and so on.
3. Simultaneously, transporting rubber, asphalt, paint, adhesives, coatings, lubricants, Polyalcohol and other non-particulate impurities.
4. Pressurized transporting and spinning polyester for cotton-fiber, polypropylene and other chemical fiber melt.
