Purpose and characteristics: hot melt adhesive pumps are suitable for conveying liquids with high viscosity and no particle shape impurities. It has the characteristics of high output pressure, high viscosity of conveying medium, high use temperature, vacuum inlet, adjustable speed and wide flow range. The material of the pump is temperature resistant, wear resistant and corrosion resistant. It has sufficient strength and dimensional stability.
1., it is used in the polymerization process to transport high viscosity melts.
2. is used in melt spinning, which is used as a supercharging pump.
3. apply to extruder or injection molding machine, improve extrusion efficiency and reduce load of extruder.
4. it is applied to transfer resin and melted resin to make the melt uniform and press the mold head.
The working principle of zb series melt pump / hot melt adhesive pump belongs to the positive displacement pump, which depends on the intermeshing of the main and driven gear to cause the change of the working volume to deliver the melt. The working volume is composed of a pump body, a cogging groove of the gear and a bearing sleeve with a side plate function. When the gear rotates, the melt enters the slot of the two gear of the suction cavity. With the rotation, the melt is brought into the discharge cavity from both sides, and the gear is meshed again, so that the melt in the alveolus is extruded out of the cavity and pressed to the outlet pipe. Bearings can not use ordinary lubricating grease to avoid contamination of melts, usually by melt self lubrication.
